Aluminum Frame Assembly Guide

  • Gold metal strips and silver brackets on a white background

    Preparing the frame and accessories

    Check that your inner frame is 1–2.3 cm thick and matches the outer frame size. Lay out all parts from the accessory bag.

  • Person wearing gloves using a tool to work on a gold object on a light gray background

    Preparing the corner brackets

    Each corner uses two bracket pieces. Place the one with the hole below and the one with screws on top.

  • Hand wearing a white glove applying a gold trim strip to a surface.

    Installing the first corner brackets

    Slide both pieces into one aluminum bar—first the hole piece, then the screw piece. Tighten the screws. Repeat on the other end and a second bar.

  • Two gold metal brackets with screws on a light gray background

    Repeating on other sides

    Repeat this process for the opposite end of the same bar, then repeat on a second aluminum bar to complete two sides of the frame.

  • Gold metal frame on a white background

    Connecting the bars

    Attach the two bars without brackets to one of the bracketed bars to form a U-shape with three connected sides.

  • Wooden picture frame with glass on a white surface, held by hands wearing gloves.

    Inserting the inner frame

    Carefully place the inner frame or artwork inside the assembled outer frame section, making sure it fits snugly and sits evenly.

  • Person wearing gloves and using a screwdriver to assemble a wooden picture frame.

    Attaching the final bar

    Connect the last bar to close the frame. Make sure all corners are aligned and tight.

  • Gold frame being adjusted with a white cloth on a light gray background

    Adding hooks and adjusting fit

    If desired, install the hanging hooks. Use the included tension plates to tighten the space between the inner and outer frames for a secure hold.